Proaim Mitchell Vibration Isolator for Camera Gimbals (15-50kg)
For DJI Ronin, Freefly MOVI & Other Remote Heads
Ready for Every Action!
Removes Vibration & Mechanical Stress from Camera Gimbals & Pan Tilt Heads!
Provides Ultimate Experience In Tracking Stabilization.
Proaim Mitchell Anti-Vibration Wire Isolator is designed to handle large Remote Pan Tilt heads and Gimbal Systems like the DJI Ronin or MōVI. This unique Vibration Isolator helps remove vibration from camera gimbals and delivers smooth tracking movement mounted on any vehicle. It absorbs jerky movements of the vehicle by utilizing strategically configured wire cables to support the gimbal and allow it to absorb inertial movements. This system is capable of levelling down outcome of vehicle moving on uneven road or rough terrains. The thickness of the wire cable is 5/16".
"WHAT YOU SEE IS WHAT YOU GET"
Video is for demonstration only
Actual Product may vary due to Product Improvements
The Isolator’s wide absorption range removes high frequency vibrations, while dampening low frequency oscillations. High frequency vibrations can be caused by motors, rotor blades, propellers, and anything that has fast moving parts. These can typically cause rolling shutter or 'jello' issues in the video. Lower frequency vibrations can be caused by a vehicle driving off-road or quick changes in direction. These movements can cause gimbal motors to 'slip' and throw off the stabilization. Also, if the camera is hard-mounted to the vehicle, any jerky moment will create huge amounts of stress on the gimbal bearings which cause permanent damage. The Vibration Isolator allows the gimbal to shift around and therefore reduce stress.
Wire modules can be customized to match the load of camera system
The Vibration Isolator is flexible to hold multiple payloads ranging in weight. This is achieved by removing a set of wires from module while using with lightweight gear.
Proaim Shock Absorber Arms
Proaim Airwave Vibration Isolator Arm (5-30kg / 11-66lb)
Proaim Airwave XL Shock Absorber Arm (30-65kg / 66-143lb)
- Construction: High-grade Aluminum
- Load Capacity with Single Spring Adapter: 15-30kg / 33-66lb
- Load Capacity with Double Spring Adapter: 40-50kg / 88-110lb
- Mounting threads: ¼”-20 & 3/8”-16
- Temperature Range: -20° to 50°C / -4° to +122°F
- Product Dimensions (HXW): 17.7cm x 16.5cm
- Product Weight (without packing): 4kg/8.8lbs
- Proaim Mitchell Vibration Isolator for Camera Gimbal
- Castle Ring (Added on 12-Sep-2019)