Proaim 18ft Camera Crane with Sr. Pan and Tilt Head & Tripod Stand

Capture smooth, dynamic sweeping pans and camera rise with Proaim 18ft Camera crane production package. Now you can easily achieve Hollywood production style motion that you have ever hoped and imagine for. The Aluminum constructed ribbed section jib crane assembles quickly without tools to benefit on-location productions. At the end of your shoot, the dslr jib breaks down into two 5 long sections for easier travel and storage. Stainless steel support cables are included for maximum support of heavy loads with better stability.

There’s lot more that goes into this production package, a robust Pan Tilt Head provided with joystick control to capture unique angles, zoom controller kit for precisely controlled zoom outs & zoom-ins to get professional looking footage.

"WHAT YOU SEE IS WHAT YOU GET"

Exclusive of Camera , Weights and Power Pack

FEATURES

- Solid Aluminum construction film equipment for high durability.
- Perfect sized jib crane for any demanding angle and tracking subjects in motion.
- Tilting movements can be achieved with control handle
- Double arm jib section for maximum stability and minimum wobble.
- Smooth effortless motions on three axis with built in roller thrust bearing system.
- Uses standard household style exercise weights (1 inch hole)
- Breaks down into five easily transported sections.
- 2 axis motorized Pan Tilt Head with high torque motors.
- 360 degree endless tilting and panning movement with reversal points.
- Consistent run speed even at slowest setting
- Stable, Non slip feet Tripod stand.
- Portable and easy to carry.
- 100% Satisfaction Guarantee.

HIGH CAPACITY CAMERA BASE PLATFORM High-capacity Camera Base platform is built to exacting standards for a remarkably stable point. It allows direct camera mounting on jib. Superior design set this base platform apart from others.

RIBBED SECTION CAMERA CRANE ARM BODY FOR HIGH STRENGTH Ribbed sections makes the jib arm stronger & durable. It supports cameras up to 15lbs without pan tilt Head and 10lbs when using with pan tilt head. The cable-tensioned design of the Proaim 18ft camera crane allows it to reach farther and higher while maintaining stability.

CENTRAL FORK WITH THRUST ROLLER BEARINGS TO HOUSE HEAVY AXIAL LOADS AND SHOCK LOADS The fork provide you a maximum stability, smooth movements , up and down jerk free action shots as well as left and right sleek style shots. Thrust needle roller bearings are fitted with a form-stable cage to reliably guide and keep many needle rollers. These bearings provide a high degree of stiffness within a minimum axial space. These bearings enable to house heavy axial loads and shock loads.

LOCKING PINS FOR STABLE OR MOVING SHOTS High strength SS locking pin is used at the pivot point, and is connected properly to prevent from ever being lost. - The control handle can be unlocked by releasing the locking pin to get moving shots. - You can achieve fixed camera angles when controlling handle is pin locked.

LCD MOUNTING PROVISION The LCD Mounting Arm for LCD Monitor comes with this camera crane.

WEIGHT - CLOSERS (INCLUDED) Stronger Hi-tensile weight closers help to achieve perfect balance.

The camera base allows direct mounting of camera.
The Handle Bar allows easy tilts for multi- dimensional shots.

PROAIM SR. PAN TILT HEAD

Designed for DV, HDV and broadcast cameras weighing up to 7.5kg / 16.5lbs or less. Our Proaim Senior Pan Tilt head offers 360-degree endless panning and tilting with reversal points.
- Runs on 12v DC power produced by the included A/C adapter or also accepts external 12V DC battery power through the included 3mtr long 4 pin XLR cable for outdoor shooting.
- You receive the Pan-Tilt Head with assembled wiring for Top and Bottom Motor.
- To install Power out to head (4 pin connector) and 12 volt DC power (4 pin XLR) in the rear of joystick box.

JOYSTICK CONTROL

- The Joystick control system includes a 7.5 mt long operating cable and AC adapter.
- Operational from a flat surface in handheld mode or when attached to the bottom of the jib arm.

Smooth, accurate, proportional joystick control for outstanding footages

SUPERB PROPORTIONAL CONTROL

-Joystick has proportional linear movement i.e. farther you move the joystick, the faster the head moves.
- Joystick is touch sensitive.
- Small movement – less speed.
- More movement – more speed.

HEAVY DUTY STAND

The Heavy duty Jib stand is constructed to carry heaviest of loads with an ease. The Sturdy base ensures strong connection between the camera crane and tripod stand, extra solid knobs for secure locking. The high strength stand acts as a supporter for all time stable shots.

FREE PROAIM LANC ZOOM CONTROLLER (P-ZC-3DV)

The Proaim Zoom Control for DV Cameras is a universal controller for LANC and Panasonic Mini DV or HDV cameras. It works only with most Sony & Canon cameras with a 2.5mm mini-jack LANC input and Panasonic models with a 2.5mm mini-jack Cam Remote input.

Mounting 3-Axis Gimbals is Possible!

Flycam Quick Release Mount
for Ronin/M/MX/R2 & MōVI (M5/M10/M15) (Optional)

Enables panning and tilting the camera remotely

The Supportive accessories are for demonstration purpose only.

CAMERA JIB STAND

- Made of Powder coted mild steel
- Base spread - 32"- 48"
- Height adjustment - 44"- 80"
- Completely collapsed height - 46"
- Outer Dia of top part of Stand - 50mm
- Makes the camera jib arm stable & solid as a rock
- Safety Pin for Secure Pole
- Weight capacity of the stand is 200lbs (90kg)

- Proaim 18ft Camera Jib Crane (P-18)
- Proaim Sr. Pan Tilt Head with Joystick box (PT-SR)
- Jib Stand (P-JS)
- LCD Mounting Arm
- Proaim Lanc Zoom Controller (P-ZC-3DV)
- FREE Storage Bag