No, the Zest Stabilizer is not compatible with the Comfort Arm and Vest.

The vest fits both men and women, and it adjusts to fit waist sizes from 28 to 60" / 71.1 to 152.4 cm.

Yes, this is compatible with the Flycam Redking. This system accepts sleds that have a 13, 19 or 22mm post.

Yes, itis compatible with the Flycam 3000.

Yes, this will work well with people who are either right or left handed.

Yes, the Blackmagic Pocket Cinema Camera 4K falls within the 11lb payload for the FLYCAM CMFT-AV. You should have no issues using this with a Pocket 4k.

Yes, it is compatible with the Redking, but the total weight should not exceed 11bs.

The main shaft dia of CMFT-AV is 18mm and if the receiver of Merlin 2 has the dia of 18.5mm/ /19mm then it is compatible with CMFT-AV.Regarding sony mc 2500, the weighing capacity of CMFT-AV is up to 5kg and if your camera set up weight is in the same range then it perfectly works with this Arm & Vest.

No, CMFT-AV will not work with the Zhiyun crane gimbal.

The Comfort Arm has the total boom pange of 17.3" and the arm can be lowered down to maximum 8.6" from the parallel position.

In order to use the Comfort Arm & Vest with the DJI Ronin SC3, you will need to use the customized FLYCAM Arm and Vest Gimbal Adapter FLCM-GA having 19mm diameter.

The buckles of the Flycam Comfort Arm & Vest are 2" Plastic clip buckles.

The Flycam Comfort Arm & Vest is not compatible with the DJI RSC2. However, you can mount this on the Flycam, Galaxy Arm & Vest GLXY-AV with the help of Flycam Gimbal Adapter FLCM-GA.

We have a 16mm spool adapter which is included in our Flycam galaxy arm & vest.

No

The Vest will fit to the sizes as follows : Minimum Chest Size : 38 inches Minimum Waist Size : 28 inches Maximum Chest Size : 52 inches Maximum Waist Size : 60 inches

Yes, you can put a DSLR on it, you can put a variety of cameras as this arm and vest will perfectly work for total weight up to 8kg(17lbs).

Yes it does help, however the most important part of stabilization is first balancing the flycam initially. That would mean placing all items that will be used on the day of shooting (ie, Monitor, Battery, Camera, Lens, Wires, additional mounts, etc) for proper accuracy in the balancing process. It will take some time to correctly balance, but once you have the corret balance of the stabilizer, the arm and vest will be extremely helpful in the final stabilization.

Yes, It comes with an Arm and Vest only. The Flycam stabilizer is ‘NOT INCLUDED’ in this kit.

Yes, it will perfectly work with your glidecam stabilizer. But this kit does come with it's own stabilizer.

The shipping weight is around 11lbs or 5kg. It does not come with a table clamp.

The main shaft (spool adapter) has the diameter of 18.5mm which can easily adapt the stabilizers with the handle’s inner diameter of 19mm. We provide a bush to add onto it to make it 21.5mm so that it can adapt to the handle’s diameter of 22mm.

No, The vest doesn’t come in a carry case.