Skip to content

Flycam Comfort Arm & Vest

01.

TRANSFORMS YOUR SINGLE-HANDED STABILIZER
The Flycam Comfort Arm & Vest converts a handheld stabilizer into a full body-worn system that eliminates the stress and captures fluid on-screen camera shots with unsurpassed comfort.
The spring arm and vest connects to each other assisting the stabilizer and greatly improving the overall functionality and reducing operator fatigue.
It lets you execute more natural-looking manual camera pan movements.
Gives you Wide Vertical range of motion, including “Low Mode”.

Flycam Comfort Arm & Stabilizer Vest
Flycam Comfort Arm & Stabilizer Vest

02.

EXPERIENCE RELIEF WITH THE COMFORT VEST
Foam Padded Vest with extremely breathable material provides great comfort, perfect fit and unrestricted movements.
Easy height adjustment & Velcro straps enable a comfortable fit for all body types.
A unique and proprietary Arm-to-Vest Connector allows the Support Arm’s angle to be adjusted relative to the Support Vest.
Push-fit buckles allow you to remove the vest quickly during short breaks.

03.

NATURALLY SMOOTH SHOTS WITH THE COMFORT ARM
The lightweight, dynamic Comfort Arm is designed to carry payloads up to 5kg/11lb and optimize performance throughout its lifting range.
The arm absorbs all jerks, bumps and shakes on even the roughest terrains while you walk or even run.
Spring Tension Adjustment Knob easily adjusts the tension of the spring depending upon the weight of the setup.
The Stainless-Steel Spring and high-quality bearings in the arm provide for an Ultra Smooth shot while you follow the subject.

Flycam Comfort Arm & Stabilizer Vest

IN-ACTION VIDEOS

SPECIFICATIONS

Construction

  Arm: High-grade CNC Machined Aluminum
  Vest: CNC Aluminum & Synthetic Fabric

Payload Capacity

  up to 5kg / 11lb

Waist size

  28" to 60"

Extension Arms

  Small: 18cm
  Big: 32cm

Length of Spring

  11.5cm

Arm Vest Connector Pin Diameter

  1.9 cm, 1.3 cm

Weight

  Stabilizer Arm: 1.39 kg / 3.5 lb
  Stabilizer Vest: 1.67 kg / 3.6 lb

IN THE BOX

Flycam Comfort Arm
Flycam Comfort Vest

USER MANUAL


delivery

Guaranteed Fast Delivery
For all orders

customer service

Quick and Efficient
Customer service

easy returns

Easy Returns
Up to 30 days

warranty

1-Year Warranty
On All Products


Customer Reviews
4.9 Based on 19 Reviews
5 ★
95% 
18
4 ★
5% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
GV
02/08/2022
Gonzalo V.

Good option with minor flaws

Great for long hours shooting, it provides decent image stabilization. The build-in quality is good. I used for live streaming mobile camera and works very good.

D
08/14/2020
Daniel

great for the price!

You will definitely be pleased with this vest for the price. Now I�m trying to figure out a way to mount the camera to it and use it with a handheld grip. Any suggestions?

JM
07/14/2020
Jr M.

Came on time !!

Open the box and love that everything was what they said it would be and prompted service thank you again !




  • Apparently I need an 18mm spool adapter for the Comfort Arm vest to work with my Neewer glide cam. Do you have a spool of that size? Or perhaps a sleeve to convert the 13 mm adapter to 18mm?

    We have a 16mm spool adapter which is included in our Flycam galaxy arm & vest.

  • Can I use Flycam Comfort Arm & Stabilizer Vest with a Ronin RS2 gimbal?

    No

  • What are the minimum and maximum chest and waist sizes the vest will fit ?

    The Vest will fit to the sizes as follows : Minimum Chest Size : 38 inches Minimum Waist Size : 28 inches Maximum Chest Size : 52 inches Maximum Waist Size : 60 inches

  • Can i put a dslr on it? is it possible to mount one on there? saw a video and they were using larger cameras but curious on the usage of a dslr ?

    Yes, you can put a DSLR on it, you can put a variety of cameras as this arm and vest will perfectly work for total weight up to 8kg(17lbs).

  • Do the vest and arm help with stabilization?

    Yes it does help, however the most important part of stabilization is first balancing the flycam initially. That would mean placing all items that will be used on the day of shooting (ie, Monitor, Battery, Camera, Lens, Wires, additional mounts, etc) for proper accuracy in the balancing process. It will take some time to correctly balance, but once you have the corret balance of the stabilizer, the arm and vest will be extremely helpful in the final stabilization.

  • Will this work with a glidecam 4000 and hd series?

    Yes, it will perfectly work with your glidecam stabilizer. But this kit does come with it's own stabilizer.

  • What is the shipping weight of this kit? it does not include table clamp? thanks!

    The shipping weight is around 11lbs or 5kg. It does not come with a table clamp.

  • What is the warranty?

    We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.

  • Is this compatible with the dji rsc2?

    The Flycam Comfort Arm & Vest (CMFT-AV) is not compatible with the dji rsc2. We have the Flycam Galaxy Arm & Vest (GLXY-AV), on which the dji rsc2 can be mounted with the help of Flycam Gimbal Adapter (FLCM-GA).

  • What are the size of the buckles?

    The buckles of the Flycam Comfort Arm & Vest are 2" Plastic clip buckles.

  • Is this compatible with the dji rsc2?

    The Flycam Comfort Arm & Vest is not compatible with the DJI RSC2. However, you can mount this on the Flycam, Galaxy Arm & Vest GLXY-AV with the help of Flycam Gimbal Adapter FLCM-GA.