Smooth & Controlled Slides Pave Way to a Better Footage!
Slider moves with motion drive system enhances the cinematic quality & provides you with the benefit of dolly shots. It resolves the challenge of shooting consistently smooth and stable footage, especially at low speeds.
Proaim has upgraded its 3ft Zeal Slider with motion control system. This combination is a lightweight & a compact substitute to the dolly setups. The zeal slider so far, has been known for its super smooth & stable movements. The addition of a powerful motion control system has further added to the zeal’s functionality that let you experience an easy way to add interest and emotion to your films.
"WHAT YOU SEE IS WHAT YOU GET"
Video is for demonstration only
Actual Product may vary due to Product Improvements
Wide Range Camera Compatible
The solid camera base plate has 1/4"-20 screw and 3/8"-16 stud which accommodates most camera bases, also allows you to quickly mount the camera.
EXTRUDED & WIDER RAIL DESIGN
It has a non-conventional extruded rail design which eliminates the irregularities to bring you a smoother and an uninterrupted shot. Its wider track provides stable base to your camera setup.
It is designed with a boon of having adjustable feet for easy adjustment and levelling on uneven terrains. Thus providing stability to your setup.
MOTION CONTROL SYSTEM
Motion control system specially designed for Zeal slider. This motor drive system when added to the slider lets you create dynamic video and time-lapse photography sequences with fluid and precise motorized slides.
POWERFUL MOTOR FOR DYNAMIC SMOOTH SHOTS
Powerful motor proves smooth or incremental movements, and works with most DLSR, mirrorless, and digital cinema cameras.
POWERFUL MOTOR WITH HIGH END BEARINGS
The 12v motor with 4 rubber ball bearings on the cart allows super smooth & noise free movements. The powerful motor system works with most DSLR’s, mirrorless and camcorders.
With the controller, you can capture those dramatic shots with super smoothness with absolute control on the camera movements. Not only this, the drive system provides you with the benefit of dolly shot which is great way to add enough emotion to your motion picture.
Turning the controller on, the Green light will be displayed. This is “normal mode” where you have to continuously press the left/right button to give left or right direction. Use the speed knob to adjust the variable speed while the carriage is in motion. Orange Light will blink when you will operate the speed knob.
Bring the speed knob to ‘zero’ and press both the red buttons together & release, to change the mode to “auto mode”. This will be displayed by orange light. Here, you just have to press the left/right button once to give the direction & then orange light starts blinking. Use the speed knob in a similar way to adjust the variable speed.
For “time-lapse”, you again need to bring the speed knob to ‘zero’ followed by pressing both the red buttons together & release. You will see that red light will start blinking slowly. Now, again press both the red buttons & release to get ‘time-lapse mode’ & now the red light will blink faster.
- Whenever, you will turn the controller “on”, the controller will automatically start with normal mode.
Add motion control capabilities to your slider
For Shipping details click here
We offer a 1-year warranty against any manufacturing defects for all our products.
Your purchases are secure with us. We maintain a 100% money back policy, if you put in a return request within 14 days from the date of delivery.
For Shipping details click here
Countries we ship to :
Proaim delivers to the following countries:
North America : Panama, Guatemala, Canada, USA, Costa Rica, Mexico, Trinidad and Tobago, Columbia, Puerto Rico
Europe : Albania, Austria, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hungary, Iceland, Ireland, Italy, Jersey, Latvia, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russian Federation, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Ukraine, United Kingdom
Asia : Armenia, Azerbaijan Republic, Bahrain, Brunei Darussalam, Georgia, Indonesia, Israel, Japan, Jordan, Kazakhstan, Korea South, Lebanon, Malaysia, Maldives, Nepal, Oman, Philippines, Qatar, Saudi Arabia, Singapore, Sri Lanka, Taiwan, Tajikistan, Thailand, United Arab Emirates, Uzbekistan, Vietnam, Yemen, Kyrgyzstan
Oceania : Australia, New Zealand
South America : Argentina, Bolivia, Chile, Colombia, Ecuador, Paraguay, Peru
Africa : Botswana, Egypt, Ethiopia, Ghana, Kenya, Mauritius, Morocco, Namibia, Nigeria, Reunion, South Africa, Tanzania, Tunisia, Zambia, Zimbabwe
- Slider Weight: 2.8kg
- Slider Length: 37"
- Load Capacity: 25kg
- Camera Mounting Screw: 3/8"-16 & 1/4''-20
- Tripod Mounting Thread: 3/8"-16 & 1/4''-20
- Construction: High-Grade Aluminium
- Feet: Adjustable Metal feet
- Input Power : 12V DC
- Motor Type: Geared motor
- Motor Power : 30RPM /12V DC
- Motor Speed: 20DB
- Load Capacity : 6kg/13.2lb (Horizontal)
DC INPUT :
- Battery Input Power : 7.2v DC
- Adopter Input Power : 12v DC
- Battery Backup : 1h+ (Not Included)
- Output Power : 12v DC (for Motor)
- On/Off Switch : Yes
- Mode Option : Press at a time dual button to speed 0
- Mode One : Normal
- Mode Two : Move Right & Left Auto
- Mode Three-Four : Timelapse
3ft Zeal slider
- Min Speed : 66Sec
- Max Speed : 13Sec
- Proaim 3ft Zeal camera slider
- Z Motion Control System
- 12v Adapter
- Storage Bag
Q : What is the actual length of this slider?
Ans: The actual length of this slider is 40 inch.
Q : Can you mount this with 2 tripods or does it just have the center mount?
Ans: The Proaim Zeal slider has 1/4"- 20 and 3/8"- 16 tripod mounting threads on sliding base. The Proaim 3ft Zeal slider can be mounted on single as well as two tripods. In case you want to use only one tripod, you can mount it at the center of the sliding base or else use two tripods at both ends.
Q : How much does this slide?
Ans: The Sliding Range of this slider is 36 inch.
Q : What sort of tripod is compatible with?
Ans: This slider has 1/4"- 20, 3/8"- 16 tripod mounting threads on sliding base. Any tripod which has this same thread setting is compatible with Proaim Zeal slider.
Q : Can I focus on a person and as I slide the camera stays fixed on the one spot?
Ans: This is possible in case you use a fluid head on the slider. It just takes practice, you need to slide and pan the fluid head simultaneously while shooting to achieve these kind of shots.
Q : Can it be used as diagonal and vertical?
Ans: You can use this slider in a diagonal and vertical position with the help of tripod fluid head. You have to adjust the tripod fluid head in order to use the slider in these specific positions.
Q : Is it mandatory to mount the fluid head on slider to install the camera?
Ans: No, its not mandatory. You can directly mount the camera with the help of ¼ camera mounting screw on the camera plate.
Q : You can adjust the height if you use it from the ground?
Ans: The slider is equipped with 4 adjustable feet that allow you to level it on irregular surfaces.
Q : Does it come with carry case?
Ans: Yes, Proaim Zeal slider comes in carry bag for easy transportation.
Q : What is the voltage of the motor?
Ans: The voltage is 12V.
Q : Which motor is used in this slider?
Ans:The motor used is 12V geared motor.
Q : How long is the cable comes with motion control system?
Ans: We provide 3meter long cable with this motion control system.
Q : Does it include battery for motion control system?
Ans: No it doesn’t include battery. You can purchase 7V or 12V battery for using it in motion system.
Q : Does it come fully assembled in its packing and is ready to use?
Ans: Yes, you have to mount the motor, cable and controller and you are set to go.
Q : Is it returnable for a full refund if it doesn’t meet my expectations upon delivery?
Ans: Yes, absolutely. We always backup our sales. In case, you don't like the product, we take it back within 14 days and you get a 100% refund.
Q : What is the warranty?
Ans: We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.